Стан та проблеми машинобудівного комплексу Республіки Казахстан
Анотація
Проблема підтримки конкурентних позицій на світовому ринку гостро стоїть перед багатьма країнами, в тому числі і перед Казахстаном. У нинішніх умовах відсутні фактори, які могли б забезпечити підвищення конкурентоспроможності в майбутньому. Метою даного дослідження є поглиблений погляд на стан і проблеми машинобудування в Республіці Казахстан. У дослідженні використано практику розвинених західних країн з питань ресурсної, галузевої та національної економічної конкурентоспроможності, а також статистичні дані по машинобудівному сектору Казахстану. Використані спеціальні теоретичні підходи, такі як порівняння машинобудування Казахстану та інших країн, аналіз їх поточного економічного стану, виявлення особливостей і недоліків машинобудівного сектору країн, що розглядаються. Були розглянуті фактори, які впливають на темпи зростання продукції машинобудування. Виявлено відмінні риси та недоліки машинобудівної продукції Казахстану. Досліджено вплив машинобудівних підприємств на макроекономічні показники регіону. Визначено основні обмеження для подальшого успішного розвитку галузей машинобудування. Оцінено прогресивність структурних перетворень у машинобудівній галузі на основі даних щодо виробництва основних видів устаткування та машин для промисловості. Отримані висновки сформульовані у вигляді запропонованих заходів щодо реанімації нинішнього конкурентного потенціалу Казахстану в машинобудуванні. Висновки включають оцінку поточної економічної ситуації та прогноз можливого розвитку подій у майбутньому
Ключові слова
економіка Казахстану, машинобудування, конкурентоспроможність, досвід розвитку
[1] Afshari, H., Tosarkani, B.M., Jaber, M.Y., & Searcy, C. (2020). The effect of environmental and social value objectives on optimal design in industrial energy symbiosis: A multi-objective approach. Resources, Conservation and Recycling, 158, article number 104825. doi: 10.1016/j.resconrec.2020.104825.
[2] Alekseieva, K.A., Gumeniuk, Y.P., Gumeniuk, O.O., Huhul, O.Y., Seheda, L.M., & Reznik, N.P. (2020). Challenges of digitalization of economy. International Journal of Scientific and Technology Research, 9(3), 7044-7048.
[3] Bayomy, N.A., Khedr, A.E., & Abd-Elmegid, L.A. (2021). Adaptive model to support business process reengineering. PeerJ Computer Science, 7, 1-25. doi: 10.7717/peerj-cs.505.
[4] Blazhchuk, N., Malyzhenkov, P., & Masi, M. (2021). Organizational structure reengineering based on the transaction approach: Case of construction business. Lecture Notes in Business Information Processing, 423 LNBIP, 48-58. doi: 10.1007/978-3-030-79022-6_5.
[5] Çakırgil, S., Yücel, E., & Kuyzu, G. (2020). An integrated solution approach for multi-objective, multi-skill workforce scheduling and routing problems. Computers and Operations Research, 118, article number 104908. doi: 10.1016/j.cor.2020.104908.
[6] Chashkov, V.N., Salykova, O.S., Salykov, B.R., Ivanova, I.V., Baganov, N.A., & Benyukov, Y.V. (2019). Analysis of the legal and regulatory status of the basic notions and procedures of the state system of ensuring the unity of measurements of the Republic of Kazakhstan in relation to the conformity assessment and confirmation of compliance of measurement instruments. International Journal of Mechanical Engineering and Technology, 10(1), 1629-1659.
[7] Chichkin, A. (2014). Mechanical engineering in the Eurasian Economic Union will become a priority industry. Russian Business Newspaper, 26(955). Retrieved from https://rg.ru/2014/07/08/mashini.html.
[8] Dantas, T.E.T., de-Souza, E.D., Destro, I.R., Hammes, G., Rodriguez, C.M.T., & Soares, S.R. (2021). How the combination of circular economy and industry 4.0 can contribute towards achieving the sustainable development goals. Sustainable Production and Consumption, 26, 213-227. doi: 10.1016/j.spc.2020.10.005.
[9] Dong, Y., Ning, J., Dong, P., Ren, Y., & Zhao, S. (2020). Investigation of fracture behavior and mechanism in high-speed precise shearing for metal bars with prefabricated fracture-start kerfs. Materials, 13(18), article number 4073. doi: 10.3390/ma13184073.
[10] Ermakova, A.M. (2021). The main directions of development of the fuel and energy complex at the regional level. IOP Conference Series: Earth and Environmental Science, 808(1), article number 012048. doi: 10.1088/1755-1315/808/1/012048.
[11] Esmaeili-Najafabadi, E., Azad, N., & Saber Fallah Nezhad, M. (2021). Risk-averse supplier selection and order allocation in the centralized supply chains under disruption risks. Expert Systems with Applications, 175, article number 114691. doi: 10.1016/j.eswa.2021.114691.
[12] Fauzi, M.A., & Paiman, N. (2019). A critical review of knowledge sharing in various industries and organizations. International Journal of Scientific and Technology Research, 8(12), 2218-2226.
[13] Hernandez-de-Menendez, M., & Morales-Menendez, R. (2019). Technological innovations and practices in engineering education: A review. International Journal on Interactive Design and Manufacturing, 13(2), 713-728. doi: 10.1007/s12008-019-00550-1.
[14] Huan, Y., Liang, T., Li, H., & Zhang, C. (2021). A systematic method for assessing progress of achieving sustainable development goals: A case study of 15 countries. Science of the Total Environment, 752, article number 141875. doi: 10.1016/j.scitotenv.2020.141875.
[15] Karpuzov, V., Golinitskiy, P., Cherkasova, E., Antonova, U., & Toygambaev, S. (2020). Development of knowledge management process at the enterprise of technical service of the agro-industrial complex. Journal of Physics: Conference Series, 1691(1), article number 012031. doi: 10.1088/1742-6596/1691/1/012031.
[16] Kato, M. (2020). Founders’ human capital and external knowledge sourcing: Exploring the absorptive capacity of start-up firms. Economics of Innovation and New Technology, 29(2), 184-205. doi: 10.1080/10438599.2019.1598670.
[17] Kaur, S.P., Kumar, J., & Kumar, R. (2017). The Relationship between flexibility of manufacturing system components, competitiveness of SMEs and business performance: A study of manufacturing SMEs in Northern India. Global Journal of Flexible Systems Management, 18(2), 123-137. doi: 10.1007/s40171-016-0149-x.
[18] Kong, D., Zhu, L., & Yang, Z. (2020). Effects of foreign investors on energy firms’ innovation: Evidence from a natural experiment in China. Energy Economics, 92, article number 105011. doi: 10.1016/j.eneco.2020.105011.
[19] Liu, H., Meng, S., Su, J., Zhang, G., & Chen, L. (2019). Reflections and suggestions on the development and engineering management of shale gas fracturing technology in China. Natural Gas Industry, 39(4), 1-7. doi: 10.1016/j.ngib.2019.04.003.
[20] Liu, S., Li, L., Tang, J., Wu, S., & Gaudiot, J.L. (2018). Creating autonomous vehicle systems. Synthesis Lectures on Computer Science, 6(1), 1-198. doi: 10.1007/978-3-031-01805-3.
[21] Madiyev, G., Kerimova, U., Yespolov, A., Bekbossynova, A., & Rakhimzhanova, G. (2018). Fostering investmentinnovative activity within the agro-industrial complex of the Republic of Kazakhstan. Journal of Environmental Management and Tourism, 9(3), 533-541. doi: 10.14505//jemt.v9.3(27).13.
[22] Makarenya, T.A., & Kazanskaya, A.Y. (2020). The problems of the machine-building enterprise economic development. IOP Conference Series: Materials Science and Engineering, 862(4), article number 042015. doi: 10.1088/1757-899X/862/4/042015.
[23] Makoveev, V., & Mukhametova, L. (2020). Improvement of the innovation management system in the manufacturing industry. E3S Web of Conferences, 220, article number 01048. doi: 10.1051/e3sconf/202022001048.
[24] Mechanical engineering of Kazakhstan and world trends. (2017). Retrieved from https://qazindustry.gov.kz/ru/article/mashinostroenie-kazahstana-i-mirovye-trendy.
[25] NPP “Atameken” and the Union of Mechanical Engineers of Kazakhstan. (2019). Results of the 2nd quarter. Retrieved from https://smkz.kz/npp-atameken-i-soyuz-mashinostroitelej-kazaxstana-itogi-2-go-kvartala/.
[26] Order of the Prime Minister of the Republic of Kazakhstan No. 115-r “On Approval of the Roadmap (Comprehensive Plan) for the Development of Mechanical Engineering for 2019-2024”. (2019, June). Retrieved from https://online.zakon.kz/Document/?doc_id=33831731.
[27] Park, N. (2017). The development of financial engineering expert STEAM program based on creative mechanical engineering design. Information (Japan), 20(2), 1147-1154.
[28] Ren, L., Sun, Y., Cui, J., & Zhang, L. (2018). Bearing remaining useful life prediction based on deep autoencoder and deep neural networks. Journal of Manufacturing Systems, 48, 1-77. doi: 10.1016/j.jmsy.2018.04.008.
[29] Saghiri, S., & Wilding, R. (2021). On the effectiveness of supplier development programs: The role of supply-side moderators. Technovation, 103, article number 102234. doi: 10.1016/j.technovation.2021.102234.
[30] Saini, P., & Chitrao, P. (2021). Tacit knowledge management in engineering industries: A bibliometric analysis. Lecture Notes in Networks and Systems, 400, 679-690. doi: 10.1007/978-981-19-0095-2_65.
[31] Statistical Yearbook of Kazakhstan. (2017). Retrieved from http://istmat.info/files/uploads/61267/kazahstan_v_2017_godu.pdf.
[32] Suwarno, S., Djanali, V.S., Pramujati, B., & Yartys, V. (2018). Preface: Disruptive innovation in mechanical engineering for industry competitiveness. AIP Conference Proceedings, 1983, article number 010001. doi: 10.1063/1.5046196.
[33] Szczepaniak, M., & Trojanowska, J. (2019). Methodology of manufacturing process analysis. In Lecture Notes in Mechanical Engineering (pp. 281-294). New York: Pleiades Publishing, Inc. doi: 10.1007/978-3-030-18789-7_24.
[34] Tahmasian, S. (2021). Dynamic analysis and optimal control of drag-based vibratory systems using averaging. Nonlinear Dynamics, 104(3), 2201-2217. doi: 10.1007/s11071-021-06440-0.
[35] Velenturf, A.P.M., & Purnell, P. (2021). Principles for a sustainable circular economy. Sustainable Production and Consumption, 27, 1437-1457. doi: 10.1016/j.spc.2021.02.018.
[36] Vishnyakova, A.B., & Tatarskih, B.Y. (2019). Organizational and economic problems of systemic modernization of enterprises of the machine-building complex. Heidelberg: Physica-Verlag. doi: 10.1007/978-3-030-11754-2_27.
[37] Waibel, M.W., Oosthuizen, G.A., & Du Toit, D.W. (2018). Investigating current smart production innovations in the machine building industry on sustainability aspects. Procedia Manufacturing, 21, 774-781. doi: 10.1016/j.promfg.2018.02.183.
[38] Wang, P., Wu, P., Wang, J., Chi, H.-L., & Wang, X. (2018). A critical review of the use of virtual reality in construction engineering education and training. International Journal of Environmental Research and Public Health, 15(6), article number 1204. doi: 10.3390/ijerph15061204.
[39] Yan, B., Hao, Y., Zhu, L., & Liu, C. (2022). Towards high milling accuracy of turbine blades: A review. Mechanical Systems and Signal Processing, 170, article number 108727. doi: 10.1016/j.ymssp.2021.108727.
[40] Zemigala, M. (2019). Tendencies in research on sustainable development in management sciences. Journal of Cleaner Production, 218, 796-809. doi: 10.1016/j.jclepro.2019.02.009.